Interior Walkmesh Linkage

Wynna · Post by **Wynna** » Thu Dec 27, 2007 7:08 pm

I would like to lay down the architectural features with their own walkmeshes built in so that somebody entering a room goes up a walkable staircase and onto a walkable landing (made of the walkable floors). I've built it, and the staircase and landing are both walkable. I can put the start point on either one and the PC can run around on either one...but the PC can't cross from stairs to landing or vice versa. How do I link two placed walkmeshes?

Thanks in advance for any tips.

indio · Post by **indio** » Thu Dec 27, 2007 7:32 pm

If possible, ensure the Heading of adjoining placeables is identical. It's in Properties.

If that doesn't work, and it likely won't, experiment bridging the gap with the walkmesh helpers. Failing that I can certainly take a look at it, if only to show you how I've gotten around such things previously.

Wynna · Post by **Wynna** » Thu Dec 27, 2007 11:08 pm

I unbuilt and rebuilt in a simpler way that only required one gap to bridge. Walkmesh helpers did the trick for that. Thanks for the tip, Indio.